Feature Overview

The following table gives an overview over the features the solutions that were presented in the last sections offer. Since OC3MON with NeTraMet Statistics Module basically is an OC3MON with NeTraMet as interface, it does of course offer more or less the same features as the standard NeTraMet does. However there are some restrictions due to the fact that the RFC1483 ATM OC3 link is not usable for the same kinds of encapsulations as a standard ethernet would be. Therefore, this solution is presented in a separate column of Table 3.2.

810

 

Cisco NLANR/MCI IETF NLANR, IETF

Host Pair + Port Pair y y y y

Host Pair only n y y y

Source Host only n y y y

Destination Host only n y y y

Network Pair n y y y

Source Network Only n y y y

Destination Network Only n y y y

Autonomous Systems n y n n

Arbitrary Groups n n y y

Default Value not specified 600s 64s 64s

Configurable n y y y

Ethernet n n y n

ATM-OC3 RFC1483 n y n y

FDDI n n y n

IPv4 y y y y

IPv6 n n n n

Encapsulated IP n n n n

TCP y y y y

Novell IPX n n y -

EtherTalk n n y -

DECnet n n y -

ISO CLNS n n y -

884should be put behind a firewall
2pt 886UDP broadcast only to specific address
2pt 888SNMPv2 authentication
2pt 890SNMPv2 authentication
2pt

SNMP SNMP